GTDISupply home
Request an account
Request an account
GTDISupply home
Request an account Customer login

Protective apparel

Eye and face protection

Face shields, safety glasses and splash goggles for clinical and facility use.

3 products

Introduction

Eye and face protection is chosen by form, by reuse and by marking. OSHA's bloodborne pathogens standard calls for masks with goggles, glasses with solid side shields, or chin-length face shields wherever splashes or sprays can be expected. The marking under ANSI/ISEA Z87.1 tells you what a product was tested for.

Buyer questions, answered

Face shield, goggles, or glasses with side shields?

A chin-length face shield covers the whole face and is the common choice for splash on isolation carts. Goggles seal around the eyes for liquid and dust. Glasses with solid side shields suit impact and light splash. OSHA lists all three as acceptable where splashes or sprays can be expected.

What do the Z87 markings mean?

Z87 is basic impact and Z87+ is high impact. D3 marks splash and droplet protection, D4 dust and D5 fine dust. Products are marked to the edition they were tested to, and Z87.62 covers protection against sprays of blood and body fluids.

Will it fit over prescription glasses and an N95?

Many shields and some goggles fit over prescription eyewear and a respirator. Each listing states this where the manufacturer does. A shield that fogs or lifts a respirator seal defeats both, so check the fit with the respirator model in use.

Single use or reusable, and how is it cleaned?

Disposable shields are discarded after one use. Reusable frames take replacement visors, and reusable goggles are disinfected with the products the manufacturer lists. Each listing states which, with the frame or headgear model confirmed on the quote for replacement visors.

Is it anti-fog?

Anti-fog coatings are stated by the manufacturer and, where marked, tested under Z87.1. Each listing states the coating as the manufacturer gives it.

How to choose

  • Choose the form for the hazard: shield for splash, goggles for liquid and dust, glasses for impact.
  • Read the marking, and match it to what the task needs.
  • Check the fit over prescription glasses and the respirator in use.
  • Decide single use or reusable, and plan replacement visors for reusable frames.

Standards this group can show

  • ANSI/ISEA Z87.1 markings (Z87, Z87+, D3, D4, D5)
  • ANSI/ISEA Z87.62 biological splash, where claimed
  • OSHA 29 CFR 1910.1030 eye and face protection requirements
  • Latex statement

What each comparison table shows

Every sub-category page compares its products side by side on these columns.

Sub-categoryCompare columns
Face shields and safety eyewear Item type, Standard and marking, Lens or visor material, Coatings, Fit, Single use or reusable, Units per case

Eye and face protection listed today

We list products by specification. Your written quote names the manufacturer, the brand and the item number before you commit to anything.

GTDI item EF-1101

Disposable face shield, 7.5 in

Lens
Optically clear polyester
Visor
Full length, 7.5 in
Anti-fog
Anti-fog, as stated by the manufa…
Account pricing. Quoted in writing. View

GTDI item EF-1102

Replacement face shield visor, clear

Meets ANSI/ISEA Z87.1 (as stated by the manufacturer)
Standard
Meets the requirements of ANSI Z8…
Lens
Polycarbonate
Visor
229 mm high by 378 mm wide
Account pricing. Quoted in writing. View

GTDI item EF-1201

Safety glasses, clear anti-fog lens

Meets ANSI/ISEA Z87.1 (as stated by the manufacturer)
Standard
Meets ANSI Z87.1+, as stated by t…
Coating
Anti-fog and anti-scratch
Anti-fog
Yes, anti-fog coating
Account pricing. Quoted in writing. View

Cross-reference

Already know the item you use?

Send us your item list with manufacturer part numbers. We cross-reference it and reply with a written quote that names the manufacturer and part number for every line.

Send us your item list

Pricing

Pricing after account approval.

Pricing is quoted in writing for your account, because it depends on quantity, delivery location and current supplier cost. Request an account and we review it within one business day. For businesses and organizations. No obligation to order.

We list products by specification. Your written quote names the manufacturer, the brand and the item number before you commit to anything.

How accounts work

Talk to the accounts team.

Phone, email and address are the same on every page of this site, on every quote and on every invoice.

  • Phone 424-832-6485
  • Email sales@gtdi.net
  • Hours Monday to Friday, 8 a.m. to 5 p.m. Pacific
  • Address GTDI, 200 S Barrington Ave, Los Angeles, CA 90049

Your first contact is the GTDI accounts team. Existing accounts: your representative's direct contact is on your account dashboard.